Having Trouble? Don't know which driver is the problem? Gigabyte GA-790XT-USB3 Marvell SATA3 RAID Preinstall Driver 1.0.0.1027 for XP Can not solve the problems? Try Driver Detective .Our Team strongly recommend you to use Driver Detective for finding latest version of Gigabyte GA-790XT-USB3 Marvell SATA3 RAID Preinstall Driver 1.0.0.1027 for XP drivers download.Also you can find Laptop Drivers here.

Gigabyte GA-790XT-USB3 Marvell SATA3 RAID Preinstall Driver 1.0.0.1027 for XP Summary

258 KB / Windows XP / Windows XP X64

CPU   
1. Support for AM3 processors: AMD Phenom II processor / AMD Athlon II processor

Hyper Transport Bus
1. 5200 MT / s

Chipset   
1. North Bridge: AMD 790X
2. South Bridge: AMD SB750

Memory   
1. 4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
2. Dual channel memory architecture
3. Support for DDR3 1866(OC) / 1333 / 1066 MHz memory modules

Audio   
1. Realtek ALC889 codec
2. High Definition Audio
3. 2 / 4 / 5.1 / 7.1-channel
4. Support for S / PDIF In / Out
5. Support for CD In

LAN   
1. 1 x Realtek 8111D chip (10 / 100 / 1000 Mbit)

Expansion Slots   
1. 1 x PCI Express x16 slot, running at x16 (PCIEX16)
2. 1 x PCI Express x16 slot, running at x8 (PCIEX8)
(The PCIEX16 and PCIEX8 slots conform to PCI Express 2.0 standard.)
3. 2 x PCI Express x1 slots
4. 3 x PCI slots

Multi-Graphics Technology
1. Support for ATI CrossFireX technology

Storage Interface Chipset:
1. 1 x IDE connector supporting ATA-133 / 100 / 66 / 33 and up to 2 IDE devices
2. 6 x SATA 3Gb / s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3, SATA2_4, SATA2_5) supporting up to 6 SATA 3Gb / s devices
3. Support for SATA RAID 0, RAID 1, RAID 5, RAID 10, and JBOD

JMicron JMB362 chip:
1. 2 x eSATA 3Gb / s connectors on the back panel supporting up to 2 SATA 3Gb / s devices
2. Support for SATA RAID 0, RAID 1, and JBOD

iTE IT8720 chip:
1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive

USB Chipset:
1. Up to 10 USB 2.0 / 1.1 ports (6 on the back panel, 4 via the USB brackets connected to the internal USB headers)

NEC chip:
1. Up to 2 USB 3.0 / 2.0 ports on the back panel

IEEE 1394
T.I. TSB43AB23 chip:
1. Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)

Internal I / O Connectors   
1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 1 x floppy disk drive connector
4. 1 x IDE connector
5. 6 x SATA 3Gb / s connectors
6. 1 x CPU fan header
7. 2 x system fan header
8. 1 x power fan header
9. 1 x front panel header
10. 1 x front panel audio header
11. 1 x CD In connector
12. 1 x S / PDIF In header
13. 1 x S / PDIF Out header
14. 1 x IEEE 1394a header
15. 2 x USB 2.0 / 1.1 headers
16. 1 x serial port header
17. 1 x clearing CMOS jumper

Back Panel Connectors   
1. 1 x PS / 2 keyboard port
2. 1 x PS / 2 mouse port
3. 1 x optical S / PDIF Out connector
4. 1 x coaxial S / PDIF out connector
5. 6 x USB 2.0 / 1.1 ports
6. 2 x USB 3.0 / 2.0 ports
7. 2 x IEEE 1394a port
8. 2 x eSATA 3Gb / s ports
9. 1 x RJ-45 port
10. 6 x audio jacks (Center / Subwoofer Speaker Out / Rear Speaker Out / Side Speaker Out / Line In / Line Out / Microphone)

I / O Controller   
1. ITE IT8720 chip

H / W Monitoring   
1. System voltage detection
2. CPU / System temperature detection
3. CPU / System / Power fan speed detection
4. CPU overheating warning
5. CPU / System / Power fan fail warning
6. CPU / System fan speed control

BIOS   
1. 2 x 8 Mbit flash
2. Use of licensed AWARD BIOS
3. Support for DualBIOS
4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features   
1. Support for @BIOS
2. Support for Q-Flash
3. Support for Xpress BIOS Rescue
4. Support for Download Center
5. Support for Xpress Install
6. Support for Xpress Recovery2
7. Support for EasyTune
8. Support for Easy Energy Saver
9. Support for Time Repair
10. Support for Q-Share

Bundle Software   
1. Norton Internet Security (OEM version)

Form Factor   
1. ATX Form Factor; 30.5cm x 24.4cm


Gigabyte GA-790XT-USB3 Marvell SATA3 RAID Preinstall Driver 1.0.0.1027 for XP is highly recommended to always use the most recent driver version available.



Try to set a system restore point before installing Gigabyte GA-790XT-USB3 Marvell SATA3 RAID Preinstall Driver 1.0.0.1027 for XP. Gigabyte GA-790XT-USB3 Marvell SATA3 RAID Preinstall Driver 1.0.0.1027 for XP will help if you installed a wrong Others driver.

if we don't have the Drivers you need,please visit Laptop Drivers or Device Drivers Download

Gigabyte GA-790XT-USB3 Marvell SATA3 RAID Preinstall Driver 1.0.0.1027 for XP is not the result you want?Use the Google Search
TAG:Other DRIVERS,Others, Others Drivers News Drivers News