Download Prolink Hurricane 9000W Driver 1.0 Drivers

Prolink Hurricane 9000W Driver 1.0 drivers download Drivers DownloadMODEM Drivers » OTHER MODEM DRIVERS Drivers » Prolink Hurricane 9000W Driver 1.0
Download Prolink Hurricane 9000W Driver 1.0 drivers

Having Trouble?
Don't know which driver is the problem? Prolink Hurricane 9000W Driver 1.0 Can not solve the problems? Try Driver Detective .Our Team strongly recommend you to use Driver Detective for finding latest version of Prolink Hurricane 9000W Driver 1.0 drivers download.Also you can find Laptop Drivers here.

update Prolink Hurricane 9000W Driver 1.0 drivers

Prolink Hurricane 9000W Driver 1.0 Summary

1.3 MB / Windows 9X / Windows ME / Windows NT / Windows 2K / Windows XP

Prolink Hurricane 9000W Driver 1.0 Specifications:
ADSL Compliance
Compliant with ADSL standards:
ANSI T1.413 Issue 2, ITU G.dmt (G.992.1) and G.lite (G.992.2).
ADSL over POTS (Annex A) and ADSL over ISDN (Annex B)
DMT modulation and demodulation
Full-rate adaptive modem
Maximum downstream rate of 8 Mbps
Maximum upstream rate of 1 Mbps
Tone detection for low power mode
Supports splitterless ADSL implementation
Supports Dying Gasp (optional)

ATM Protocols
WAN mode support: PPP over ATM and over Ethernet. (RFC 2364 / 2516)
LAN mode support: bridged / routed Ethernet over ATM (RFC 1483) and
Classical IP over ATM (RFC 1577)
ATM Forum UNI 3.1 / 4.0 PVC
Up to 8 VCs (Virtual Circuits)
ATM SAR (Segmentation and Reassembly)
ATM AAL5 (Adaption Layer type 5)
OAM F4 / F5

Bridge Mode
Ethernet to ADSL self-learning Transparent Bridging (IEEE 802.1D)
Supports up to 128 MAC learning addresses·

Router Mode
IP routing / RIPv2 / Static routing
DHCP (Dynamic Host Configuration Protocol) Server and Client
NAPT (Network Address and Port Translation)
NAT (Network Address Translation)
ICMP (Internet Control Message Protocol)
Simultaneous USB and Ethernet operation·

Security
User authentication for PPP
PAP (Password Authentication Protocol)
CHAP (Challenge Authentication Protocol)
Password protected system management
Ethernet interface
Compliant with IEEE 802.3 standard
10 / 100 Mbps auto selection
4 x LAN ports (Cable Type Auto-Sensing)
USB host interface
Compliant with USB Prolink Hurricane 9000W Driver 1.0 Specifications, Revision 1.1
USB full speed (12 Mbps)
Vendor specific descriptors
HTTP Web-based management
Firmware upgrade
WAN and LAN side connection statistics
Configuration of static routes and Routing table
Configuration of NAT / NAPT
Password protected access
Selection of Bridge or Router Mode
PPP user ID and password

Wireless
Fully compatible with IEEE 802.11b standard and supports a high data
rate up to 11Mbps.
Interoperable with IEEE 802.11b (DSSS) 2.4GHz-Compliant equipment
Two adjustable antennas provide for better access angle
Capable of up to 128-bit WEP encryption
Support up to 32 wireless users.

Prolink Hurricane 9000W Driver 1.0 is highly recommended to always use the most recent driver version available.


Try to set a system restore point before installing Prolink Hurricane 9000W Driver 1.0. Prolink Hurricane 9000W Driver 1.0 will help if you installed a wrong OTHER MODEM DRIVERS driver.

if we don't have the Drivers you need,please visit Laptop Drivers or Device Drivers Download

Prolink Hurricane 9000W Driver 1.0 is not the result you want?Use the Google Search
TAG:MODEM,OTHER MODEM DRIVERS, OTHER MODEM DRIVERS Drivers News Drivers News
GoogleSearch Prolink Hurricane 9000W Driver 1.0 drivers download
YahooSearch Prolink Hurricane 9000W Driver 1.0 drivers download
MSNSearch Prolink Hurricane 9000W Driver 1.0 drivers download